SemWare
    • Forgot your Username?
    • Forgot your password?
-
-
  • Doc-login
  • Support
 
English English
fr Françaisen Englishde Deutsch
  • Home
  • My Solution
  • News
  • Training
  • Services

> Subscribe to Semaphores, SemWare's Newsletter

 

  • All
  • NEWS

Happy New Year 2021!

Look at the big picture... and let Gus³ attend to details Did you know that the year 2021 has been proclaimed by the United Nations General Assembly as ...

January 1 2021

Happy New Year 2021!

Happy New Year 2021!

January 06, 2021 FOUARD Isabelle 564

Look at the big picture... and let Gus³ attend to details!

Did you know that the year 2021 has been proclaimed by the United Nations General Assembly as the International Year of Peace and Confidence?

Confidence is a precious and fertile ground that nourishes our creativity and our ability to adapt. It is at the core of our philosophy and of the way we operate.
Because we cultivate it every day, we are able to provide our customers with constantly improved software solutions.
Because our customers trust us, we offer them the best version of ourselves, our products and our services, every day.

So, to start this new year on the right foot, we would first like to express our deepest gratitude to all those very ones who have given us, give us and will give us this wonderful opportunity.
Thank you for these years of shared confidence.
Thank you for this renewed confidence.

May 2021 bring you peace, happiness and lightness.

So do, do, do ... do 6 batches in one silo

Manage your silo batches in complete peace and quiet Once upon a time there were 6 batches, poured into a silo: route of a silo batch, when it is managed ...

November 4 2020

So do, do, do ... do 6 batches in one silo

So do, do, do ... do 6 batches in one silo

November 04, 2020 FOUARD Isabelle 1329

Manage your silo batches in utter peace and quiet


Once upon a time, there were 6 batches poured into a silo: here is the route of a silo batch, when it is managed by our software solution Gus³...

  • Gus³ guarantees the compatibility of the batches poured into a silo: safety is total! And since the checks performed by the software are fully automatic, you won't even have to worry about them!
  • Gus³ also guarantees the full traceability of these very particular batches, without overloading its kernel. The software even gives you the choice between two levels of traceability! So, for example, you can decide to manage the contents of your silo globally, as you would do for the contents of a hopper. But you can also opt for a much finer level of traceability, thanks to an original mechanism proposed by Gus³. With this second option, you can for example target as accurately as possible the materials to be recalled in the event of quality problems.
  • Gus³ also guarantees quality monitoring, in real time. Indeed, the software calculates in complete autonomy a certain number of key values, such as the TKW.
And that is how, with Gus³ , the management of your silo batches becomes child's play. So do, do, do ... do 6 batches in one silo ... Of course, there could have been more batches, at the very least! But to be told the long version of the silo batch management according to Gus³, you'll have to contact our team !

Combined deliveries: Gus³ goes all out!

With our Gus³ software solution, optimize your combined deliveries ... without puzzling them out! In July 2010, a group of international scientists demons ...

September 18, 2020

Combined deliveries: Gus³ goes all out!

Combined deliveries: Gus³ goes all out!

March 15., 2019 FOUARD Isabelle 1625

With our software solution Gus³, optimize your combined deliveries ... without puzzling them out!


In July 2010, a group of international researchers demonstrated by exhaustive calculation that it is possible to solve any Rubik's Cube in a maximum of twenty moves (allowing clockwise and anticlockwise turns).

With our software solution Gus³ :
  • What maximum number of moves will it take your forklift drivers to prepare, in the minimum time, the pallets of basic seeds for your propagators?
  • By what original combination of moves our software solution Gus³ will make you save a lot, actually quite a lot, of time?
  • In what enormous proportion can this time-saving be increased, knowing that Gus³ limits making U-turns, going back and forth, criss-crossing, handling and traffic jams in your storage aisles?
Our own researchers have the answers!
So, to know everything about the means to optimize your combined deliveries, according to the resolution methods of Gus³, contact our team...

Gus³ Salvo mode: a hundred per cent hit rate!

Opt for multi-order picking, thanks to the Salvo mode of our integrated software solution Gus³ Whichever method you use to manage your inventory ouflows ...

July 24, 2020

Gus³ Salvo mode: a hundred per cent hit rate!

Gus³ Salvo mode: a hundred per cent hit rate!

October 08, 2019 FOUARD Isabelle 1540


Opt for multi-order picking, thanks to the Salvo mode of our integrated software solution Gus³



Whichever method you use to manage your inventory outflows (FIFO, LIFO, FEFO…), the Salvo mode of our integrated software solution Gus³ will help you optimize your deliveries, by giving you the possibility of grouping your sales order preparations per proximity of storage locations and picking routes. Gus³ already included a WMS*; it now has a totally innovative functionality!







 

Software and logistics intelligence

If the principle is simple, the calculation is complex. It requires all the intelligence of Gus³ :

  • the power of its ERP iGus, for which your stocks have no secrets: quantity (weight, volume…), quality (batch number…), picking addresses, various movements;
  • the security of its procedural tool myGus which, associated with coding systems such as barcode readers and/or RFID microchips, transmits stock movements to the ERP without needing to enter them;
  • the relevance of its order scheduling service, able to select the right orders at the most appropriate times and places.

The Salvo mode is the result of the alliance between the software intelligence of Gus³ and logistical solutions adapted to contexts and delivery objectives. This approach aims to optimize the number of sales orders prepared, while limiting the number of steps and handling that your sales order pickers will have to perform.

 

Tailor-made tools for big rates

As you are following a picking route anyway, best take as many references as possible, according to proximity criterion. And as you are holding the items in your hands, best sort them directly per sales order, on the fly, without waiting for the packaging step.

This is how we came to design, in close collaboration with one of our clients, very specific picking trolleys, tailored to the requirements of the situation.

These trolleys made it possible to combine the picking and sorting of the items ordered, while respecting pre-existing packaging constraints: volume of the packages used, shipping standards such as Chronopost, Colissimo, etc.

And the results were not long in coming. They even exceeded our expectations: the number of order pickers has been halved while the number of lines of articles delivered per day is constantly increasing!

 

Everything is under immediate, systematic and exhaustive control

Follow the guide ! In the storage aisles, myGus manages every step and every gesture of your order pickers, following a very precise itinerary and picking order: once the procedure has been validated, improvising is out of the question!

Your order pickers activate their barcode reader at each key stage of the procedure: inventory movements are recorded in real time.
Anomalies, if any, are detected on the fly, before the packages have been sent to your customers. Errors are corrected on time, more easily and quickly. And as our procedural tool myGus is user-friendly and easy to use, the training of your teams remains minimalist.

(*) WMS : Warehouse Management System


Read also:
Optimize your deliveries with the Gus³ scheduler

Optimize your deliveries with the Gus³ scheduler

Guys*, if you are tired of taking many steps, then what you should take is Gus³ The sales order scheduler is a service of our software solution Gus³. Its mission? ...

May 20th

Optimize your deliveries with the Gus³ scheduler

Optimize your deliveries with the Gus³ scheduler

September 20, 2019 FOUARD Isabelle 1456

Guys*, if you are tired of taking many steps, then what you should take is Gus³ 


The sales order scheduler is a service of our software solution Gus³. Its mission? Orchestrate your order preparations at best, taking into account your urgency, your resources and your constraints. With the scheduler, you will sure deliver better, faster and ... more zen !
It all starts with a powerful configuration: that of YOUR delivery priorities. Even though the tool is provided with a standard configuration, it can also be customized at will.
Once configured, the order scheduler automatically determines, in real time, the order and conditions under which your order lines must be prepared, so that your priorities and your delivery criteria are met. And if your priorities change, you just have to change the settings!
You can determine your delivery priorities from an infinite number of criteria:
  • the availability of items,
  • stockouts and the ways to possibly remedy them (manufacturing process, purchases, etc.),
  • the typology of your customers (market place, plant grower, etc.),
  • the nature of the order (counter order, internet ...),
  • the delivery date,
  • the delivery period (high season, season, low season ...),
  • the carrier lift time,
  • the estimated preparation times,
  • your order pickers' skills,
  • the preparation places (warehouse, workshop, depot, etc.),
  • the necessary tools,
  • the geographical proximity of the picking addresses,
  • etc.
Everything will of course depend on your activity and your delivery strategy. But as the scheduler is capable of determining priorities at a very fine level of complexity, it can adapt very easily to a wide variety of situations.
In addition, the scheduler can be coupled to myGus, the procedural component of our software solution Gus³. The objective is to control each stage of the preparation of orders, from picking to packaging, in order to guarantee that the packages comply with the order lines and your contract givers' possible requirements.
And to push the optimization of order preparation even further, while limiting traffic jams in the storage aisles, it is also possible to couple the order scheduler to the Salvo mode of our software solution Gus³.
In 10 years, the scheduler has proven its worth in various activity sectors, such as seed processing or the manufacturing of accessories and equipments for industrial vehicles. Whether its mission was to deliver sachets of certified seeds or spare parts for trucks, the tool always reached its goals. When it did not exceed them!
For more information on the sales order scheduler of Gus³, consult our iGus Seeds page or contact our team.


Read also:
Gus³ Salvo mode: a hundred per cent hit rate!

*: Ra petit, a cult nursery rhyme, sung and danced, in the no less cult french TV show "Le Petit Rapporteur"

By-products on a platter

At the Marlenheim seed station, the Comptoir Agricole have chosen myGus to automate the management of their by-products For a little over a year, in the ...

April 10th

By-products on a platter

By-products on a platter

February 19, 2019 FOUARD Isabelle 4535

At the Marlenheim seed station, the Comptoir Agricole have chosen myGus to automate the management of their by-products

For a little over a year, in the Marlenheim seed station, myGus, the procedural component of our integrated software solution Gus³, regulates the removal of by-products for our client Comptoir Agricole. And everyone enjoys!

At the weighbridge, the truck drivers don't need anyone. Thanks to myGus, its touch screen, its barcode reader and its printers, the drivers are totally autonomous to:

  • identify themselves when they arrive,
  • declare the nature of the by-products they must remove,
  • validate weighing (with and without loading),
  • access the storage area where the by-products will be loaded,
  • get their administrative documents on the fly (weight tickets, passage tickets, delivery notes ...).

Prints for the seed station are started from myGus. The documents are printed in the offices, as the by-products are removed. So, as soon as they have been loaded, they are already ready to be invoiced!

By-product stocks are automatically updated by the ERP iGus according to the data collected by myGus :

  • at the plant when by-products are brought to their storage area,
  • at the weighbridge when by-products are removed.

And everything is under control!

From a distance, yes, but still as close!

We inform you that our team remains on deck for the duration of the lockdown imposed as part of the national measures taken to ...

March 23, 2020

From a distance, yes, but still as close!

From a distance, yes, but still as close!

March 19., 2020 FOUARD Isabelle 4019


We inform you that our team remains on deck for the duration of the lockdown imposed as part of the national measures taken to combat the spread of COVID-19.

Teleworking and remote connections, we are experts! So we can assure you that we remain available to assist you, through the usual communication channels : telephone, Skype, emails, as well as on our website and on our Bugzilla support platform.

We wish you excellent health.

Take good care of yourself, your colleagues and your loved ones.

Gus³ software BOM: a recipe for success

With Gus³, manage your compound articles with even more simplicity The BOM screen of our iGus ERP evolves, to bring even more comfort and efficiency ...

February 21 2020

Gus³ software BOM: a recipe for success

Gus³ software BOM: a recipe for success

October 29, 2019 FOUARD Isabelle 3587

With Gus³, manage your compound articles with even more simplicity

The BOM screen of our ERP iGus evolves, to bring even more comfort and efficiency to the management of your compound articles.
From now on, you can view all your compound articles at a glance, and consult the detail of each BOM with a single click. This gives you faster and easier access to the information you need for entering your compound articles and managing their manufacturing, in the short, medium or longer term.

Our ERP iGus adapts to all types of compound articles:

  • whatever the way they are managed (batch or not),
  • whatever their nature (seeds, treatment slurry, other consumables, etc.),
  • whatever the complexity of the induced tree structures, especially when a component is itself a compound article.

When your components are expressed in different units (kg, liters, thousands of grains ...), iGus gives you the possibility of entering them in net quantities rather than percentages. This functionality is very practical, especially when you have to manage the manufacturing of a dose of finished product, which consumes seeds, treatment product, one or more labels, a bag, and why not a little thread…

Once you have configured your compound article, iGus automatically offers, as and when manufacturing operations are planned, the list of available raw materials whose quality is compatible. Then you just have to select the articles that interest you.

Then, iGus automatically calculates the quantities required for all the components you have entered, in strict compliance with the proportions you have indicated, then reserves them immediately. This allows you to avoid reservations of raw materials that are often long, tedious and all the more risky as your BOM is complex.

In case of stock shortages, iGus can even offer you one or more alternative solutions, depending on stock availability. In this perspective, you just have to declare the articles likely to replace your components, when you configure your BOM.

Thus, for seed-type articles, the proposals of iGus can take several forms: similar varieties, identical varieties but which may present differences in generation, treatment, packaging, etc.

And as iGus gives you the possibility to specify an effective date and an expiration date for each component used, you also manage the evolution of your compound articles, in complete safety!

 

Happy New Year 2020!

The entire SemWare team send you their best wishes for 2020. May this new year bring you happiness and success in all your ...

January 1 2020

Happy New Year 2020!

Happy New Year 2020!

December 24th COHEN Fanny 3535

The entire SemWare team send you their best wishes for 2020.
May this new year bring you happiness and success in all your projects.

Concerning Gus³, all the indicators are in the green to start the year on a high note, thanks to a well-filled toolbox and well-oiled tools.
A proven trio:

  • a powerful ERP, iGus, to manage your seed stations, from production to certification; and you will be able to take advantage of the recent improvements that have been made to certain major functions such as inventory, manufacturing MRP, preparation scheduler, declaration of mix batches to the GNIS ;
  • a nomadic companion, myGus, to configure your field procedures and implement them safely, with or without network;
  • a secure web service tiGus, for reporting and automated communication between your partners and you.

An arsenal of complementary solutions and applications, including:
  • the brand new Laboratory module, to manage the transformation of your seeds at best of their qualitative characteristics;
  • the indispensable Look-out, to monitor systems, automate file exchanges between partner companies and automatically trigger scheduled actions;
  • the unmissable Monitor, to streamline all of your administrative or functional procedures, including between teams; it can for example mix crossed actions between the laboratory, the manufacturing workshops and the truck drivers;
  • the clever Salvo mode, to help you optimize your deliveries by grouping your order preparations by proximity of storage locations (multi-order picking).

So forward ho!

Symphony for PLCs dedicated to the seed industry

MyGus composes, you profit! Husk, sort, clean, dry; shell, calibrate, treat, bag ... To orchestrate the processes of your seed station, you can trust myGus ...

December 4, 2019

Symphony for PLCs dedicated to the seed industry

Symphony for PLCs dedicated to the seed industry

March 07., 2019 FOUARD Isabelle 4013

MyGus composes, you profit!

Husk, sort, clean, dry, shell, calibrate, treat, bag ... To orchestrate the processes of your seed station, you can trust myGus, the procedural component of our software solution Gus³.

MyGus guides your procedures from one end of the process to the other, in strict accordance with the manufacturing order that has been planned in the ERP iGus.

MyGus coordinates and orders your processes, secures your flows. Its goal is yours: the finished product obtained must be 100% compliant with the result you expect. And for that, it conducts your PLCs with a rod of iron: myGus makes a go of them!

For each manufacturing process, myGus calculates the parameters to configure the PLCs; thus, for a bagging of corn seeds, the software defines:

  • the speed of the conveyor belts, per hopper,
  • the number of pumps to be activated in the seed treatment machine, depending on the number of active ingredients required for the treatment slurry considered,
  • the feed rate of each treatment pump,
  • the rotation speed of the treatment bowl,
  • etc.

As for the precision dialogue developed between myGus and PLCs, it is the result of a close partnership between Cimbria, a specialist in PLCs dedicated to the seed industry, and SemWare, a specialist in integrated software solutions for process industries.

With Gus³, more control, less data entry

Take advantage of the intelligence of our integrated software solution Gus³ to plan and create your manufacturing orders on the fly, while securing your processes ...

November 15 2019

With Gus³, more control, less data entry

With Gus³, more control, less data entry

October 16, 2019 FOUARD Isabelle 4119

Take advantage of the intelligence of our integrated software solution Gus³ to plan and create your manufacturing orders on the fly, while securing your processes

What do you want to do with this batch of seeds? With our integrated software solution Gus³, you do not have to go back to the office to plan the next manufacturing order. Indeed, wherever you are in the seed station, and whatever the stage of transformation of the batch, the list of the operations compatible with the status of the batch is suggested to you by myGus, the procedural component of Gus³. Calibration? Bulb cleaning? Bagging ...? Whatever operation you want, simply select it on the touchscreen of myGus. The latter then asks the ERP iGus, the guardian of quality and traceability, the authorization to start manufacturing.

With Gus³, your quality constraints will be respected to the letter

If the manufacturing operation you have requested is possible, iGus generates for you the corresponding manufacturing order, for immediate implementation by myGus. Thus, over time and processes, you avoid many tedious administrative data inputs. But if iGus identifies one single reason for not starting the operation (the batch has been reserved for another operation, is subject to quality control, etc.), then the ERP will veto! With the system Gus³, you are free to take initiatives and improvise with the flow, but you will never put the quality of your seeds at risk.

With Gus³, automate all the operations that can be

Your transformation processes can include unavoidable, predictable, or programmed manufacturing operations. They can also be conditioned by certain triggers, such as a level of humidity, of temperature, a stock movement ...

So, if you receive a batch of wheat at your seed station, your only manufacturing option will be to initiate a sorting operation. If it is a batch of corn, it will be a husking operation. And if the Monitor, our continuous monitoring system, for example detects that a tipper has been placed on a drying location, guess what will happen next ...

For each of these operations, an order must be created in iGus. Traceability is at this price. But in all these cases, iGus can do without your validation, and create the next manufacturing order automatically, completely autonomously. And during this time, you can focus on topics that require all your vigilance.

And if the operation does not impact the quality of the batch, such as when, for example, a container is moved? So the procedural component myGus will suffice, with all the flexibility that characterizes it!

{autotoc enabled = no}

TiGus: already 10 years!

With the secure web service tiGus, use the data you want, how you want, when you want, where you want, and exchange it with ...

August 16, 2019

TiGus: already 10 years!

TiGus: already 10 years!

April 03, 2019 FOUARD Isabelle 4632

With the secure web service tiGus, use the data you want, how you want, when you want, where you want, and exchange it with whoever you want, in complete confidentiality

 

10 years ago, SemWare designed the Web application tiGus, a secured data sharing tool. This application has come to complete the already existing software offer: iGus, a powerful ERP solution, and its procedural companion myGus, an expert in secured data acquisition in the field.

TiGus aims to facilitate the communication of operational data, in real time, while guaranteeing the absolute confidentiality of the data communicated:

  • internally, between employees belonging to the same company (production management, inventory management, sales management, etc.),
  • externally, between partner companies (clients, suppliers, subcontractors ...).

TiGus is a flexible and easy to use tool. And you are autonomous: unlike other existing tools, with tiGus, you don't need any computer engineer to convert the database structure or develop reports and modify them as needs change.

With tiGus, users are at the center of the communication system. They are the real recipients of information. And this is precisely where the originality of SemWare's approach lies! With tiGus, users do not have to wonder where the data come from. They do not need to have special computer skills or knowledge. In fact, users only need a web browser and a tiGus account to access the essential data. And they can view them as easily as if they used a spreadsheet tool.

 

A wide range of ready-to-use dashboards, covering most of your activity

 

10 years after its creation, the tiGus Web application totals about XNUMX standard dashboards providing complementary synthetic views on all the data entered or generated in your ERP, as your processes unfold.

These standard dashboards were designed mainly for players in the seed industry: contract givers, agricultural cooperatives, seed stations. Their objective is to respond quickly to most of the questions that frequently arise during the processing of seeds, from the initial reception of the harvests to the delivery of the bags containing the finished products:

  • What quantities have been put into stock for each seed production contract?
  • What quantities, in tonnes, have been ordered, produced? What quantities still have to be manufactured, bought? What quantities have been carried over? Per customer and item, per item, per product?
  • What quantities have been consumed and received, per order and type of movement? What is the corresponding loss rate, in kilograms and in percentage?
  • What is the total quantity in stock, all subcontractors considered?
  • What is the quantity in stock, in number of grains?
  • What was the status of the stocks on this or that (prior) date?
  • What are the latest analysis results for the stock in this or that container?
  • What certification movements have been made, per batch?
  • What quantities are available for delivery regarding each article?
  • What shipments have been made on behalf of this or that carrier?
  • What are the expected service invoices?
  • Etc.

And if the dashboards currently present in tiGus do not answer all the questions you have, then the SemWare team will develop specific dashboards, tailored to your needs, for your exclusive use! Therefore tiGus has proven its effectiveness in other fields of activity than seed, such as the rail industry.

 

Confidential and secure access to targeted and up-to-date data

 

Each user only has access to the data that concerns his function or his mission in the company. The settings of access rights are done for each user profile and for each dashboard. The access to the data is confidential, and you go straight to the main point.

To access his data, each user has his own private space. He can connect when he wants, wherever he is, with the means he has (PC, tablet, smartphone). Thus, data security and flexibility of use go hand in hand, for your comfort.

The data present in the tiGus dashboards tiGus are the same as those entered or generated in the management software. If the ERP data change, the data present in the tiGus are updated automatically. The update frequency can be configured, depending in particular on the user's software configuration. When the database allows it, tiGus favor real time.

 

A powerful and customizable data analysis tool

 

Users can manipulate their data at will, customize their standard dashboards as easily as if they were using a spreadsheet, without the need for special software.

To do all this, they are provided with powerful functions such as filters, control breakdowns, highlighting of lines and cells, calculations and functions (total, average, number of records, number of distinct values, minimum, maximum, median ), aggregations ...

It is also possible to create all kinds of graphics ... And it is easy to switch from the dashboard to the corresponding graph.

Some dashboards even have dynamic navigation, which automatically reduces the number of columns displayed to the number the user strictly needs. It is very practical when the data are numerous (qualitative characteristics ...).

If they wish, users can keep their personalized dashboards in their private space. To do this, they just have to save them. And they can also download them in Excel format or print them in pdf format.

 

Fully automated data exchange

 

A contract giver needs to know in real time the status of all his stocks, including those whose propagation is carried out by subcontractors (agricultural cooperatives ...). As for these subcontractors, they need to receive continuous orders from the contract giver.

The tiGus application has been designed to respond to this type of situation, by making communication autonomous between partner organizations (clients, suppliers, subcontractors ...).

These data exchanges are carefully configured in the management software: what data will be shared, with whom, according to what frequency, according to which confidentiality criteria ... Thus, the data transfers will be done in a fully automated way, only to the private spaces of the people concerned.

As for the senders, they can at any time check if the data they wish to transfer have been transmitted. For this, all they have to do is connect to their own tigus account.

And this is how :

  • a contract giver can have visibility on all the stocks, all subcontractors considered, using a single tiGus, updated in real time,
  • a subcontractor can automatically receive his delivery orders, or other standard files, directly in his management software, without having to re-enter them.

 

An application to be consumed without moderation, and without any restriction related to the nature of the management software used

 

The tiGus application has EDI interfaces, as standard. Thus, with a single application, you can exchange data with whoever you want, even if the management systems are different: the tiGus application plays the role of interface, ensures the compatibility of the exchanges and guarantees the integrity of the exchanged data.

In 10 years, tiGus has successfully orchestrated numerous exchanges of information between various management software, in different contexts.

Thus, a contract giver equipped with SAP can subcontract part of its production and manufacturing to different seed stations equipped with the ERP iGus... Thanks to tiGus, this contract giver can send their manufacturing orders to all their subcontractors, in a fully automated way. In this case, the data present in the orders (varieties, quantities, etc.) are transferred directly from SAP to the ERP iGus, via the tiGus application which plays its role of interface between different ERP. The manufacturing order coming from SAP automatically generates a manufacturing order in the ERP iGus... And there you go!

TiGus has also proven its worth with the BaaN ERP. ERPs of this type manage physical flows. They collect a multitude of data but they do not make it possible to do the reporting or to have an overview on the data stored. Leveraging their long experience of the BaaN software, SemWare have therefore developed a tiGus / BaaN interface to easily consult the data present in the BaaNERP, in the form of ready-to-use dashboards. In 10 years, several dashboards have been created:

  • Business, to estimate the overall cost of a project, from all the elements that constitute it,
  • Finance, to group together all the accounting entries,
  • Justification of 408, to detail the account of accrued invoices,
  • Time tracking, to summarize, per operation, per operator, per week and per day, the manufacturing times and manufacturing costs, realized and forecast.

 

A small investment for a large service

 

There are very powerful tools on the market to help users access their data without needing to know the structure of the database. Business Object is one of them. This rich environment provides reports and dashboards that evolve continuously. However, its license is very expensive and very often only very large organizations can afford it.

With tiGus, we offer a solution accessible to all types of organizations, including the smallest. It is therefore very affordable financially.

In addition, the more tiGus reports, the more money tiGus makes you: this application helps you access your essential data, to make the right decisions, at the right time! Thus, you get a real return on investment very quickly, on the one hand concerning the application tiGus, on the other hand concerning your management system and the mountain of data that lie dormant in it ... Decidedly, with tiGus, reporting is real fun!

And if YOUR performances were counted by tiGus ? Do not postpone: consult our business experts without further delay, to study with them the solutions that will suit you ...

 

Also read the news:

  • TiGus, the transcoding carrier
  • Certification in tiGus
  • Automated RA file
  • TiGus for KWS
  • Justification of 408
  • SAP / tiGus plug
  • TiGus for BaaN
  • TiGus for OBS
  • Your manufacturing needs under the microscope
  • 3 more strings to tiGus' bow
  • More of Gus for Semences du Sud and Semara
  • Valfrance choose tiGus
  • Deployment of tiGus: + 2
  • TiGus is born!

{autotoc enabled = no}

Optimize the drying of your contracts

For the drying of your propagation contracts, myGus ticks the right boxes Do you want to receive your propagation contracts at best, considering the capacity ...

July 15, 2019

Optimize the drying of your contracts

Optimize the drying of your contracts

March 18., 2019 FOUARD Isabelle 3554

For the drying of your propagation contracts, myGus ticks the right boxes

Do you want to receive your propagation contracts at best, considering the capacity of your drying facilities, and in less time than it takes to say? MyGus, the procedural component of our integrated software solution Gus³, has the procedure you need. Story of a procedure ...

A truck arrives at the entrance of your seed station. It delivers the first load of the crop of a propagator with whom you have a contract.

At the weighbridge, the truck driver declares the propagation contract number on the touch screen of myGus. It's an open sesame: immediately, myGus selects the drying facilities whose total capacity is the most appropriate to receive the entire contract, all deliveries combined.

To make this selection, myGus uses data already entered in the ERP iGus :

  • the storage capacity and availability of each drying facility in your seed station,
  • the estimated total weight of the contract, calculated from the number of hectares of the contract and its forecast yield per hectare.

And you can be sure that the filling ratio proposed by myGus is optimal!

To start the reception, it remains only to validate the proposal of the software. As for your synoptic, it will only have to be beautiful...

 

Read also:

  • Mix of container on the fly, for a max of storage

Mix of container on the fly, for a max of storage

Limit air holes in your containers and your storage capacity will gain altitude In a seed factory, a golden rule applies: it is strictly forbidden to mix...

July 15, 2019

Mix of container on the fly, for a max of storage

Mix of container on the fly, for a max of storage

February 15, 2019 FOUARD Isabelle 6460

Limit air holes in your containers and your storage capacity will gain altitude

In a seed factory, a golden rule applies: it is strictly forbidden to mix two separate seed batches in the same container!

So what to do when the harvest comes and the grain comes in? Because the number of your containers is far from infinite. Worse: the better the harvest, the more complex the logistics ...

To optimize the filling of your containers at best, considering their capacity, without endangering the quality of the seed you produce, trust myGus , the procedural component of our software solution Gus³. In the heat of the moment, myGus can tell your forklift drivers if there is a batch compatible with the one they have just finished pouring and whose container is only partially filled.

The compatibility criteria are determined according to the business rules (same variety, same generation, same caliber, etc.). They are set in the ERP iGus. And in the field, myGus only authorizes such assembly if these rules are followed to the letter. If the conditions are fulfilled, the container will be filled to the fullest, on the fly, while respecting the quality of the seeds it contains. Moreover, the traceability of this very particular batch can attest to it!

SemWare-style inventory

  1 integrated Gus³ software solution, 1 cube for 3 components: iGus ERP, myGus procedures, tiGus dashboards. 1 ERP to ensure the traceability of stock movements ...

June 15, 2019

SemWare-style inventory

SemWare-style inventory

September 27, 2019 FOUARD Isabelle 3679

 

1 integrated software solution Gus³,

1 cube for 3 components: iGus ERP, myGus procedures, tiGus dashboards.

1 ERP to ensure the traceability of stock movements from start to finish.

1 procedural component myGus and

1 barcode reader for scanning items in the field.

0 raccoon.

 

1 brand new screen that is named Inventory.

3 tabs in the brand new screen, to do everything:

1 first tab to reserve the stocks to be inventoried, precisely;

1 second tab to compare the theoretical quantities and the quantities found, after counting, obviously;

1 third tab to explain, justify the discrepancies, quickly.

0 raccoon.

 

1 powerful filter for targeting the stocks that you want to inventory, as finely as possible.

3 selection levels: per warehouse, per location, per container.

1 color code to facilitate work and inventory tracking, visually.

3 colors displayed by iGus, automatically :

1 white color when stocks are ok straightaway;

1 orange color to indicate the discrepancies that need to be explained;

1 green color once the discrepancies have been justified.

1 quantity of corrected values, as few as possible: iGus looks out for squalls but to err is human.

0 raccoon.

 

1 life size test performed.

1 inventoried stock, the same as last year.

3,5 inventory days last year.

1,5 inventory day this year.

2 inventory days saved for

12 people who worked.

1 very good inventory, without bragging.

1 integrated software solution Gus³ that is more and more complete.

1 terrific search engine optimization, except maybe for the raccoon.

Besides ... still no raccoon !

A new certification interface for your seed mixes

With the new certification interface of CertiGus you can also declare your batches of seed mixes to the GNIS with your eyes closed ...

May 15th

A new certification interface for your seed mixes

A new certification interface for your seed mixes

May 07, 2019 FOUARD Isabelle 2232

With the new certification interface of CertiGus you can also declare your batches of seed mixes to the GNIS with your eyes closed !

A new certification interface enriches the range of tools already existing in CertiGus, the certification module integrated into our ERP iGus. This seventh interface is specifically dedicated to batches of cereal and forage seed mixes. It has been designed on the same model as our standard declaration interface for batches of pure varieties, which we created about ten years ago.

Of course, the files generated by iGus in the context of the declaration of batches of seed mixes are, for obvious reasons of traceability, much more complex than the files generated in the context of the declaration of batches of pure varieties. But from the point of view of the user, the new interface is as easy and quick to use as the standard certification interface: we have been careful not to upset the work habits of users, concerning an extremely meticulous and repetitive task.

Let's remind that with CertiGus, you do not need to re-enter the certification data to generate the certification files for the GNIS. You just have to press the button, literally. Because the data to be exported are already in the ERP iGus, either because they have been entered or because they have been generated, as and when operations have been carried out in the seed station:

  • manufacturing data: batch number, batch quantity, packaging;
  • data related to the use of batches of certificates provided by the GNIS : serial numbers of certificates consumed for each manufacturing order, number of certificates rendered unusable due to printing problems, number of certificates unused or rendered unusable during the implementation of the manufacturing order.

So, the data security is really total. In addition, CertiGus knows by heart the standards imposed by the GNIS, and can very easily be adapted to other standards. Thanks to its test mode, you can check your certification data before sending your files. And in the event of an anomaly, you are alerted immediately!

For more information about our new certification interface, do not hesitate to consult our experts. They will guide you to the solution that suits you!

Put an autopilot in your seed lab

SemWare launch their new laboratory module, the quality pilot for seed laboratory workers SemWare's new lab module is the result of a ground-breaking approach, applied to seed ...

April 1th

Put an autopilot in your seed lab

Put an autopilot in your seed lab

February 26, 2019 FOUARD Isabelle 5666

SemWare launch their new laboratory module, the quality pilot for seed laboratory workers

SemWare's new lab module is the result of a ground-breaking approach, applied to seed manufacturing for over 10 years. This makes it a pragmatic tool, able to adapt finely to the reality of any seed station.

The laboratory module has a global aim. It streamlines and secures the flows linked to the analyzes carried out in the laboratories, from the initial reception of the batches in the seed station, to the final quality control which will classify them according to their quality results.

From an industrial point of view, it makes it possible to rationalize processes and to make the best possible profit of each batch, according to the qualitative characteristics measured.

Thus, when you use the laboratory module, quality and traceability are at the controls; they pilot the processing of seeds from one end of the manufacturing line to the other, in complete safety:

  • secured reception of samples, tracking of their movements and identification of their storage locations (internal or external);
  • assistance with analyzes, to perform measurements as well as to optimize and secure the entry of results;
  • automatic checks of the consistency of results and of batch compliance, for each analysis or family of analyzes, using scales and mathematical formulas configured in the ERP iGus ;
  • immediate identification of possible non-compliance, to ensure optimal responsiveness;
  • automatic classification of batches according to their quality results and proposal of action plans adapted to the results obtained;
  • possibility of carrying out exceptional qualitative operations (downgrading of a batch, change of generation, regression ...) according to circumstances and industrial constraints.

The secret to the efficiency of the laboratory module? It is the subtle alliance of its different ingredients:

  • a powerful ERP, iGus,
  • the flexibility of the procedural component myGus,
  • ready-to-use dashboards thanks to the web application tiGus, some of which have been specially adapted to the needs of laboratories,
  • the involvement of an experienced team, close to customers, on a daily basis.

And there are many benefits:

  • automatic generation of the exact number of sample labels defined in the sampling plan;
  • automatic edition of the adequate number of analysis labels, per analysis, per family of analysis, per standard ...;
  • economy of calculation of results of analyzes every time iGus calculates them: averages (example: rounded to 100 of the average result of germination analyzes), conversions ... ;
  • economy of entry of the analyzes, whenever the results are calculated by iGus ;
  • proportional reduction of the risk of making measurement or data entry errors, with control points per units, for the family, or for the entire data entry ;
  • quick reaction if the quality of a batch needs to be checked or if counter-analyzes are to be started;
  • traceability of measurements, per operator and per data entry;
  • transparency, easy management and responsiveness in case of control by the SOC : myGus guides the SOC technician towards the samples he wishes to control and no one needs to intervene;
  • ability to group samples per destination (a seed station, a laboratory, the GNIS...), for example for a delivery (a shipping note is then edited automatically);
  • etc.

The current settings in iGus are based on the standards imposed by the GNIS. However, it is possible to model any other standard, just as finely. And the procedures of myGus will follow these other standards as easily as they follow the standards of the GNIS.

 

GNIS : French Interprofessional Organisation for Seeds and Plants

 

To lighten your logistics, myGus takes the weight off your mind

Entrust your weight data to myGus and save several hundred data entries/day, as well as the associated risks of errors! Do not enter your weight data anymore! ...

March 15, 2019

To lighten your logistics, myGus takes the weight off your mind

To lighten your logistics, myGus takes the weight off your mind

March 06., 2019 FOUARD Isabelle 3554

Entrust your weight data to myGus and save several hundred data entries/day, as well as the associated risks of errors!

Do not enter your weight data anymore! Leave this task to myGus, the procedural component of Gus³, our software solution for process industries.

MyGus is a mobile software application, specialized in the secured acquisition of data, in the field. MyGus accompanies you everywhere, in the factory, on the weighbridge, in your storage areas ... It can communicate with the weighing solutions that equip your seed station, with or without network.

Thus, from his forklift, a driver only has to select a weighing device on the touch screen of his myGus, if it is necessary to select it. Indeed, as myGus knows the manufacturing line and the related exit point, it can most of the time deduce which weighing device is used. The weight displayed by the digital indicator is instantly displayed on the touch screen of myGus, in the input field provided for this purpose. And myGus will transmit this weight to the ERP iGus only if the driver validates it. The control is double, and the safety is total!

Moreover, if the tare of the container has already been entered in the ERP iGus, the net weight of the weighed seeds is calculated automatically. And if the tare has not been entered, myGus has the procedures you need to get the weight data you need, in the flow of your processes, and at the most appropriate times.

We have developed communication protocols with several brands of weighing scales used in industrial environments, including Precia Molen, MasterK, Scaime, Testut ... And our experts are at your disposal to offer you solutions adapted to the brands that equip your seed station. Feel free to contact them !

 

Package tags: myGus gets stuck into them

With myGus, pack, it's weighed! Posting packages can be a long and tedious step when preparing your orders. ...

February 28 2019

Package tags: myGus gets stuck into them

Package tags: myGus gets stuck into them

November 14, 2018 FOUARD Isabelle 6737

With myGus, pack, it's weighed!

The postage of packages can be a long and tedious step when preparing your sales orders. But when our procedural tool myGus gets stuck into it, it becomes child's play. And realisation times are considerably reduced.

MyGus has access to all known data concerning the items shipped and the packaging items: weight, recipient, date of dispatch ... And we have made sure that the application is able to transmit this information to the web services of carriers, directly, and entirely independently. Thus, in the majority of cases, it is no longer necessary to weigh the packages. Furthermore, myGus declares them while packaging.

The corresponding labels are retrieved on the fly, in PDF or ZPL format (Zebra Programming Language) and can be glued immediately. As for the packing lists, they can be communicated systematically without slowing down the process. And no typing error can slip into them.

The experiment has been conducted for parcels sent via Colissimo or Chronopost, which use proprietary label formats. But it can very well be generalized to other carriers, because the Web service technology is really widespread...

Best wishes for 2019!

2019 ... What's new? All the members of the SemWare team have put on new clothes to deliver this message: in 2019, Gus³ gets out of its shell! ...

January 1 2019

Best wishes for 2019!

Best wishes for 2019!

December 11th FOUARD Isabelle 6863

2019 ... What's new?

All the members of the SemWare team have put on new clothes to deliver this message: in XNUMX, Gus³ gets out of its shell ! So we announce to you a SUPER NEW YEAR XNUMX in the company of our software solutions iGus, myGus and tigus , gathered in just one application: Gus³ ! And we promise you enhanced usability, efficiency and profitability. But this is not new!

 

 

Read also the articles:

> 'The game is over, the treasure is straight ahead!'

> 'An article on SemWare in the 183 issue of Semences et Progrès'

> 'Gus³ will soon be going for a makeover!'

Agrosemens, our first 100% organic client

With Agrosemens, Gus³ crusades for 100% organic seeds. But not only ... Agrosemens is a family business based in Provence. It specializes ...

December 4, 2018

Agrosemens, our first 100% organic client

Agrosemens, our first 100% organic client

September 06, 2018 FOUARD Isabelle 7983

With Agrosemens, Gus³ crusades for 100% organic seeds. But not only...

Agrosemens is a family business based in Provence. It specializes in the production and marketing of seeds from organic farming. To cope with its rapidly changing and growing activity, the seed company decides to adapt its logistics organization and its software tools. 

To do this, Agrosemens have contacted Pexlog, specialist in supply chain optimization, and SemWare, specialist in software solutions for the management of seed stations. Between these three specialists, it is the beginning of a genuine partnership. And it works like a charm...

MyGus, the procedural component of Gus³ , quickly proved to be the ideal tool to meet the current logistical expectations of the seed company. Indeed, myGus is exactly at the crossroads of needs. It will help to streamline the activity of Agrosemens and improve inventory turnover. And by doing so, it will ensure:

  • maintaining a high level of quality,
  • guaranteeing traceability,
  • serving certain administrative aspects.

For example, thanks to its scheduler, myGus will be able to rationalize the preparation of sales orders, by distributing tasks between the operators in an appropriate order.

In this context, SemWare also develop new tools:

  • an interface with Prestashop, the e-commerce software used by Agrosemens, as part of their trading activities,
  • an interface with Sage 100, the software used by Agrosemens in accounting,
  • the implementation of the method DDMRP (Demand Driven Material Requirement Planning), so that Gus³ can help Agrosemens to adjust their manufacturing and purchases to their sales, with the very best in the Supply chain.

Definitely, producing organically is really good, but doing so even better is fabulous!

 

 

Our website becomes multilingual

On our website too, we want to speak to you in your language In the technical sector, English is the lingua franca par excellence ...

November 15 2018

Our website becomes multilingual

Our website becomes multilingual

September 06, 2018 FOUARD Isabelle 8755

On our website too, we want to speak to you in your language

In the technical sector, English is the lingua franca par excellence. But according to SemWare, you also have the right to prefer your native language.

We have designed our software solutions iGus, myGus and tigus so that you can use them in the language of your choice. Therefore, our website had to take up this challenge!

Today, we offer it in 3 different versions, in addition to French: English, of course, but also German and Dutch.

For your convenience, we are working to extend the number of languages ​​available more widely. So tell us ... Which language do you prefer ?

 

> Read the article ''Gus³, the language of your choice'

> Read the article ''Gus³ in English'

> Read the article ''Gus³ in German'

> Read the article ''SemWare Worldwide Company'

MyGus, the GPS of your handling

With myGus, always have some handling in advance to meet your quality requirements. Stack, unstack, re-stack, place, move, ...

May 28th

MyGus, the GPS of your handling

MyGus, the GPS of your handling

April 24, 2018 COHEN Fanny 7576

With myGus, always have some handling in advance to meet your quality requirements.

Stack, unstack, restack, place, move, relocate ... Do you dream of optimizing your handling while respecting the level of quality required for your processes? 

Your forklift drivers can now be guided by the new algorithm of myGus. This algorithm calculates their route to the container they need. It may be the most accessible container. Or the container that avoids going back and forth and unnecessary handling. But in all cases, it is always the container qualitatively compatible with the process in progress (assembly, calibration, bagging ...).

What if, to get to the most accessible container, you still have to move others? MyGus suggests the storage locations being most appropriate for the manufacturing processes to come. Indeed, since you have the container on the forks, let's move it intelligently!

The game is over ... The treasure is straight ahead!

Setting sails for Gus³… does not go against the grain Many of you have participated in our treasure map game. Thank you ...

April 24th

The game is over ... The treasure is straight ahead!

The game is over ... The treasure is straight ahead!

April 24, 2018 COHEN Fanny 12429

Setting sails for Gus³… does not go against the grain

Many of you have participated in our treasure map game. Thank you and congratulations to all of you, explorers of solutions for the management of process industries! And congratulations to our great winner Delphine (from Top Semence), to whom we wish a very pleasant stay in Mallorca, under the sun obviously.

The solution to the game was Gus³ will soon be going for a makeover! Because the treasure is Gus³, precisely. We expect the new version of our offer Gus³ will be operational for the 2019 campaign.

Imagine the 3 components of Gus³ united in a single interface, and everything being at your fingertips! With such benefits as: increased security, enhanced functionalities, without forgetting all the new products that we have concocted for you.

And for more details on the contents of the treasure, read the article Gus³ will soon be going for a makeover!

Keep an eye on your stock ... the good one!

The Monitor keeps an eye on your stock, wherever it is It all started when the Saint Sylvain seed station, belonging to the Agrial group, asked us for a solution ...

March 5, 2018

Keep an eye on your stock ... the good one!

Keep an eye on your stock ... the good one!

April 23, 2018 COHEN Fanny 7635

The Monitor keeps a weather eye on your stock, wherever it is

It all started when the seed station of Saint Sylvain, belonging to  the Agrial group, asked us for a solution to simplify exchanges with their logistics supplier Letna.

The solution we proposed is based on the Monitor. The latter identifies the stock movements, then transmits them to the logistics supplier, completely autonomously. And it's convenient because it's automatic!

The logistics supplier receive the information they need (article code, certification batch number such as the batch number for the GNIS in France, quantity, etc.) in the format of their own management system, even before the shipment arrives. And if the SSCC code is used to identify pallets, the teams in place can perform the reception, directly. They can also handle the storage or the shipping of a sales order, without having to re-label. 

Decidedly, when the Monitor keeps a weather eye open, you can sleep like a baby... and even dream of a holiday in the sun!

 

> Read the article ''The Monitor'

MAC in the bag

When myGus goes to the fields, field records are in the bag! MyGus now has its mobile application: MAC *. Thus, when your ...

February 23 2018

MAC in the bag

MAC in the bag

April 24, 2018 COHEN Fanny 6724

When myGus goes to the fields, field records are in the bag!

MyGus now has its mobile application: MAC *. Thus, when your technicians do their field surveys, they can enter the data instantly, in the middle of the fields, with or without 3G. They can also add photos, for example to illustrate a report on the quality of an agricultural parcel (disease, hail ...). And they can even split a parcel, if part of it encounters a quality problem.

All this data is relayed automatically to the central system as soon as your technicians have network coverage. This gives all users access to information even before your technicians return to the seed station.

The application is available on Windows and Android, and soon on IPhone.

Do you dream of collecting more data, faster, without any double data entry? Put MAC * in your bag!

 

* MyGus Aux Champs 

What if I go to Mallorca?

Go to Mallorca, go directly to Mallorca, do not go through the homepage and do not waste a minute before participating in ...

February 20 2018

What if I go to Mallorca?

What if I go to Mallorca?

February 20, 2018 COHEN Fanny 9801

Go to Mallorca, go directly to Mallorca, do not pass 'home' and do not waste a minute before participating in our treasure map game

We invite you to travel, for more than one reason! Embark aboard the SemWare galleon and explore our treasure map. You will find the solution to the riddles we have concocted. It is hiding among the solutions that we offer for the seed industry ... So without further ado, click on the link below and try to win a week-long stay on an island in the sun, for you and the person of your choice !

 

> I want to play!

An article on SemWare in the 183 issue of Semences et Progrès

You will hear from us ... The journal Semences & Progrès published an article on SemWare in its latest issue ...

February 6 2018

An article on SemWare in the 183 issue of Semences et Progrès

An article on SemWare in the 183 issue of Semences et Progrès

February 06, 2018 COHEN Fanny 11946

You will hear from us ...

The journal Semences et Progrès published an article on SemWare in its latest issue (no. 183).

The article is in the section 'Des entreprises et des hommes - en Bref'. It focuses on our project to bring together our different tools in a single platform, Gus³. But the article also relates our first steps in Germany...

 

"SemWare, soon a global platform", Semences & Progrès n ° 183, January 2018.

Happy New Year 2018!

For 2018, we're not promising you the moon ... we're shooting for the stars! Not so long ago, in a nearby galaxy, near, very near...

January 1 2018

Happy New Year 2018!

Happy New Year 2018!

January 27, 2021 FOUARD Isabelle 96
For 2018, we are not promising you the moon ... we are shooting for the stars!

Not so long ago, in a nearby galaxy, near, very near ...

A small group of enthusiastic and bearded computer engineers decided to join forces and put their ideas at the service of actors in the seed sector: seed stations, agricultural cooperatives ...

They wanted to offer innovative software solutions, particularly well fitted to the needs and constraints of this demanding profession.

Their credo? Facilitate, secure, optimize:
  • communication between the partners concerned,
  • data acquisition and management,
  • organization of operations and manufacturing processes.
Today, in an increasingly competitive economic environment, Gus³ proves to be a complete, efficient and profitable software solution in more than 25 seed production plants.

And supporting Gus³, a small group of computer engineers, still as enthusiastic and even more bearded, unite their voices to wish you a very beautiful and very happy new year!

Start by reserving material per container

Pass your tray first ... Yes, but which one? In our iGus ERP, you can now reserve the material per batch and per container, ...

July 18, 2017

Start by reserving material per container

Start by reserving material per container

April 27, 2017 COHEN Fanny 8770

Pass your tray first ... Yes, but which one?

In our ERP iGus, you can now reserve the material per batch and per container, simultaneously. iGus then suggests the containers whose batches are compatible with the requested manufacturing process. As you select the containers, iGus displays an overview of the quantity that will be produced (total net weight per container) and the proportion between fertile and sterile grains. 

You can also determine the order in which the containers will be used. Take the example of a manufacturing process using 2 hoppers. You distribute the containers between the hoppers and determine the order in which they will be consumed. The objective is to obtain a homogeneous result. Thus, the TKW (Thousand Kernel Weight) becomes particularly stable. In some cases you will even be able to avoid a preliminary batch constitution. But in any case, you will gain flexibility and save a lot of time!

 

Gus³ will soon be going for a makeover!

One for all, all for Gus³! IGus, myGus and tiGus were born and grew up separately, to meet additional needs: ...

July 6, 2017

Gus³ will soon be going for a makeover!

Gus³ will soon be going for a makeover!

April 27, 2017 COHEN Fanny 15428

One for all, all for Gus³ !

IGus, myGus and tiGus were born and grew up separately, to meet additional needs: ERP, procedures and dashboards respectively. These XNUMX musketeers of the process industry management will be one very soon. Indeed, we plan to bring them together in a single application: Gus³ . And we are getting close!

Security will be global: you will only need to login once. The existing functionalities will be present, but they will be better nested: export of a report in format Excel, column search, start of a procedure from a management screen ... Without forgetting many practical innovations ...

It will also be possible for users to further customize the tool: setting up of the homepage, display options and management of favorites.

And from an aesthetic point of view, our key words will be visual coherence and modernity.

But shh... it's a surprise!

Interactive tank

On the menu, automatic updating of data… à la carte! For a long time, seed stations equipped with the ERP iGus have had ...

June 20, 2017

Interactive tank

Interactive tank

April 27, 2017 COHEN Fanny 11445

On the menu, automatic updating of data ... à la carte!

For a long time, seed stations equipped with the ERP iGus have had access to a file containing the third party details of their cooperative, and the related information (contact details, possible links with a warehouse, solvency ...).

This file is updated automatically, once a day in general. That's why we call it a Tank. The data in this file have been copied from the cooperative central file and have been put iniGusformat. They can therefore be copied directly into the information system of seed stations equipped withiGus.

Until now, these copies of copies were not updated. But one more step has just been taken! From now on, the seed stations can, if they wish, program the automatic updating of these copies of copies.

Moreover, these updates are à la carte! They can be total or partial, concern only certain data or reservoirs. Thus, day after day, seed stations can be sure that their data are kept up-to-date, while preserving those that do not come from the central file of the cooperative!

Look-out

"Fishy files to starboard!" The Look-out application monitors the contents of hard disks, locally or within a network. It operates ...

May 23th

Look-out

Look-out

April 27, 2017 COHEN Fanny 10796

"Fishy files to starboard!"

The Look-out application monitors the contents of hard disks, locally or within a network.

It operates completely autonomously, insofar as its mission has been defined beforehand. Look-out does nothing by chance. And nothing escapes Look-out...

You need to automate file transfers (via EDI, FTP...), data exchanges, the sending of emails? Look-out is there, discreet but efficient. It continuously scans the files assigned to it and triggers the planned actions as soon as the conditions are met.

Testimony: "You needn't harass her. Vigie loads a file into its destination database, as soon as it arrives in the EDI station it is monitoring "- Cétautomatix.

You can set up its reaction time. However, its ability to react in the moment can represent a major asset, especially in logistics. Thanks to Look-out, the seed station of Saint-Sylvain (of the Agrial group) have successfully automated their exchanges with one of their carriers, Letna.

And soon, the hard drives will also have all the attention of Look-out. We are already planning to entrust it with additional missions, such as monitoring the systems. There will be alerts when a log is too big, when a disk is filled, etc.

Look out for long, Look-out !

 

TiGus the transcoding carrier

Give it a point of reference and it will transcode your data, in full The transcoding carrier tiGus is at the heart of the automated ...

May 5th

TiGus the transcoding carrier

TiGus the transcoding carrier

April 27, 2017 COHEN Fanny 9120

Give it a point of reference and it will transcode your data, in full

The transcoding carrier tiGus is at the heart of the automated communication circuit that we put in place between different third parties. It guarantees absolute match between all the distributed data. No partial information will go through!

The application transcodes the data coming from an external system. Then it routes them to one of the solutions of Gus³, provided that no data are missing.

It can transcode articles, products, orders, etc. To do so, it relies on reference data, such as the article code GTIN or the certification batch number (in France, it is the batch number GNIS). And you can consult the data with the codes and vocabulary of your own information system!

 

 

> Read the article ''TiGus for BaaN'

Gus³, the language of your choice

Gus³ speaks your language. And that is our choice! Sticking as much as possible to the reality of users is much more than a goal ...

April 27th

Gus³, the language of your choice

Gus³, the language of your choice

December 17th 19584

Gus³ speaks your language. And that is our choice! 

Sticking as much as possible to the reality of users is much more than a goal for SemWare. It's a credo! That's why the software solution Gus³ has been designed and structured to meet the linguistic needs that may emerge.

In the technical sector, English is the lingua franca. We have therefore developed a standard English version for each component of Gus³ - ERP iGus, procedures myGus, dashboards tiGus.

However, not everyone speaks English. Moreover, the largest seed producers are not necessarily English-speaking countries. So we have made sure that the users of Gus³ can have each of its components in the language or terminology of their choice, including per sector. If they wish, they can even use multiple languages ​​simultaneously.

And to meet the specific needs of a brand new customer, we are also developing a German version of Gus³ !

 

> Read the article ''SemWare Worldwide Company'

> Read the article ''Deployment of Gus³: + 1'

> Read the article ''Gus³ in English'

> Read the article ''Gus³ in German'

> Read the article ''Business Questionnaire'

> Read the article ''Training enhanced'

 

 

Gus³ in German

Gus³ plays its first game in German For the ZG Raiffeisen seed station, our first German customer, our Gus³ offer includes the ...

April 11th

Gus³ in German

Gus³ in German

April 27, 2017 COHEN Fanny 10981

Gus³ plays its first game in German

For the seed station ZG Raiffeisen, our first German client, our offer Gus³ includes the translation, in German, of its 3 components: the ERP iGus, the procedures myGus and the dashboards tiGus. 

Of course, an English version of Gus³ already existed. But not everyone speaks English at ZG Raiffeisen, in particular at the Heitersheim seed station. A German version was therefore necessary.

Thanks to the translation module of our ERP iGus, we can integrate the terminology used daily by the teams of ZG Raiffeisen. For example, it is possible to translate the French word "lot" by "lot" in German. But we have retained the German word "partie" to meet the specific needs of our client.

All user modules of our ERP iGus have been translated, except for the certification module CertiGus. Indeed, the latter must first be adjusted to the specific features of the German market.

The next step will be to translate the dashboards of the application tiGus, knowing that the first tests carried out were very promising.

Finally, we plan to translate a first series of procedures myGus by next July.

And the game is just beginning ...

 

> Read the article ''Deployment Gus³ + 1'

> Read the article ''SemWare Worldwide Company'

> Read the article ''Gus³ in English'

Show more results


Contact details:

Phone: + 33 (5) 61 98 55 12

Fax: + 33 (5) 61 87 25 34

Address :

Place dit Jouandin, 31430 Gratens, France

Legal Terms

Various information :
Sales:
Customer Support :
Maintenance :
Website Administrator:
 

Back to Top

© SemWare 2007 - 2021